Fix Audio Not Playing in tinytunes DJ

If you're not hearing anything, you're not alone. Most "no sound" issues are simple: autoplay rules, muted output, or permissions. Use this page as a calm checklist you can run in a couple of minutes.

Open tinytunes DJ

Most common causes (autoplay policy, muted tab/device, permissions)

The most common causes are:

• Autoplay policy: the browser needs a click/tap before audio can start.
• Muted tab or muted system volume.
• Wrong output device selected (speakers vs headphones).
• Permissions or blocked prompts (especially for local files).

Step-by-step fixes (start simple -> deeper)

Try these in order:

1. Click/tap inside the tinytunes DJ page, then press Play again.
2. Check your system volume and make sure your device is not muted.
3. Check the browser tab: unmute it if it is muted.
4. Confirm your output device (headphones/speakers) is the one you expect.
5. Reload the page and try again.
6. Restart your browser (or device) if nothing changes.

If you're on a phone or tablet, turn on Do Not Disturb and try again with headphones.

Do it in tinytunes DJ (quick test routine)

This routine tells you whether audio is truly working:

1. Open tinytunes DJ.
2. Load any track to Deck A.
3. Press Play, then raise the deck volume/gain a little if needed.
4. Move the crossfader fully to Deck A (to avoid hearing only the other deck).
5. Confirm you hear audio for at least 5 seconds.
6. Record a short 10-15 second clip and stop.

If you can record and hear playback, audio is working.

Common issues + fixes

• Autoplay blocked: click/tap inside the app, then press Play again.
• Tab muted: unmute the tab and retry.
• System output muted: raise system volume and confirm headphones are plugged in.
• Wrong output device: select the correct output in your OS audio settings.
• Bluetooth issues: switch to wired headphones or speakers.
• Lag makes audio start late: close tabs/apps and retest.
• YouTube track silent or failed: try a different track and confirm your connection.

FAQ

Why do I need to click before sound works?

Many browsers require a user gesture before they allow audio playback.

I see the track playing but I hear nothing. Why?

Most often: muted tab, muted system volume, or wrong output device.

Does using headphones change anything?

It can. Headphones help you notice audio immediately and avoid room noise or TV speaker confusion.

What if only one deck plays sound?

Move the crossfader fully to each side and test both decks. Then reset the crossfader to center.

Can extensions block audio?

Sometimes. If you're stuck, disable suspicious extensions and retry.

What if this only happens on my phone?

Phones are stricter about autoplay and background audio. Use Do Not Disturb, keep the browser in the foreground, and consider switching to tablet/laptop for practice.

Next up

• Back to overview: DJ in Your Browser (No Download) With tinytunes DJ
• Browser setup guide: Best Browser and Settings for tinytunes DJ
• Improve responsiveness: Reduce Latency and Lag in tinytunes DJ

Open tinytunes DJ